Ar/CO2
Main

Gas detection at S4

ArCO2
 Instruction
 Configuration
Low Pressure

          Operat. Mode

          Calibration

P 10
 Instruction
 Pictures

CF4
 Instruction
 Pictures

H2

New LH2-Targets

Start of LH2-Target S0
 Change to LD2
 Turn off LH2-Target S0
 Alarm
 Pictures

Contacts

Links and

          Downloads

 

 

Holger Pfeifer

       September 2003

 

 

 

Instruction

 

 

The gas-mixture is operated with a pressure of ~1 bar!

 

A change of the flow rate is done only with channel 1; channel 2 follows automatically the selected flow rate in channel 1.

 

Switch settings:     Set point: "int.",   Blending: "on"

 

Never change the adjustment of channel 2: you will change the blending!

 

The display must be in coincidence with the calibration table.

 

(The calibration table is displayed behind the front door)

 

 

 

In case of any trouble please contact:

 

H.J. Junk         Tel.: 2808        DetLab            H.Junk@gsi.de

 

K.Burkard       Tel.: 2732        PSA 7321       k.burkard@gsi.de